Capturing The Displayed Image - Omron fq2 User Manual

Capturing the Displayed Image

The current display on the Touch Finder or PC Tool can be captured and used in text files and other files on the
computer.
The captured images are saved in external memory
*1: Images captured on the Touch Finder are saved in the SD card. Images captured with the PC Tool are saved in the computer's hard disk drive.
(Setup Mode or Run Mode)
The image that is being displayed when the button is pressed is saved in external memory.
• Storage Location and File Names
Storage location
\CAPTURE
Important
Make sure an SD card is inserted in the Touch Finder before capturing display images.
Note
For the PC Tool, data will be saved in the following folder: \\..\My Documents\OMRON FQ
Saving the Currently Displayed Camera Image
You can save the Camera image that is displayed on the Touch Finder or computer.
(Setup Mode) −
The Camera image that is being displayed when the
• Storage Location and File Names
Storage location
\CAPTURE
Important
Make sure an SD card is inserted in the Touch Finder before capturing display images.
Note
For the PC Tool, data will be saved in the following folder: \\..\My Documents\OMRON FQ
224
Convenient Functions for Operation
*1
File name
YYYY_MM_DD-HH_MM_SS_MS.BMP
Example: The following name would be used for an image that was captured at
10:10:21.350 pm on March 10, 2010.
2010_03_10-22_10_21_350.BMP
−
(Log Image Button)
File name
YYYY_MM_DD-HH_MM_SS_MS.IFZ
Example: The following name would be used for an image that was captured at
10:10:21.350 pm on March 10, 2010: 2010_03_10-22_10_21_350.IFZ
as bit maps.
Button is pressed is saved in external memory.
FQ2 User's Manual