Setup Procedure For Inspection Items - Omron fq2 User Manual

4-2 Setup Procedure for Inspection Items

The basic steps for setting up inspection items are shown below.
Configuring Inspection Items
Step 1
Step 2
Setting Judgement Parameters
Step 3
If measurements are unstable
Step 4
Step 5
Note
Only one inspection item can be used with the FQ2-S1@.
Up to 32 inspection items can be combined and used with the FQ2-S2@ or FQ2-S3@.
92
Setup Procedure for Inspection Items
Teaching
Setting Detailed Items
Re-teaching
FQ2 User's Manual