Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 66 Configuration > Management > Remote MGMT > Wake On LAN
LABEL
Wake On LAN over WAN
Settings
Enable WOL over WAN
Port
Wake On LAN
Wake MAC Address
Start
Apply
Cancel
21.8 TR069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your ZyXEL Device, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending
Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible
Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the EMG3425-Q10A, modify settings, perform
firmware upgrades as well as monitor and diagnose the EMG3425-Q10A. You have to enable the
device to be managed by the ACS and specify the ACS IP address or domain name and username
and password.
Click Configuration > Management > Remote MGMT > TR069 to display the screen as shown.
Use this screen to configure your EMG3425-Q10A to be managed by an ACS.
Chapter 21 Remote Management
DESCRIPTION
Select this option to have the EMG3425-Q10A forward a WoL "Magic Packet" to
all devices on the LAN if the packet comes from the WAN or remote network
and uses the port number specified in the Port field. A LAN device whose
hardware supports Wake on LAN then will be powered on if it is turned off
previously.
Type a port number from which a WoL packet is forwarded to the LAN.
Enter the MAC Address of the device on the network that will be turned on.
A MAC address consists of six hexadecimal character pairs.
Click this to have the EMG3425-Q10A generate a WoL packet and forward it to
turn the specified device on.
A screen pops up displaying MAC address error if you input the MAC address
incorrectly.
Click Apply to save the setting to the EMG3425-Q10A.
Click Cancel to begin configuring this screen afresh.
EMG3425-Q10A User's Guide
155
Advertisement
Table of Contents
