Wlan Station Status - ZyXEL Communications EMG3425-Q10A User Manual

Dual-band wireless ac/n gigabit ethernet gateway
Table of Contents

Advertisement

Figure 22 Monitor > Packet Statistics
The following table describes the labels in this screen.
Table 12 Monitor > Packet Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop

7.6 WLAN Station Status

Click Monitor > WLAN 2.4G/5G Station Status or the WLAN 2.4G/5G Station Status
(Details...) hyperlink in the Status screen. View the wireless stations that are currently associated
to the EMG3425-Q10A's 2.4GHz or 5GHz wireless network in the Association List. Association
means that a wireless client (for example, your network or computer with a wireless network card)
has connected successfully to the AP (or wireless router) using the same SSID, channel and
security settings.
Chapter 7 Monitor
DESCRIPTION
This is the EMG3425-Q10A's interface type.
For the LAN ports, this displays the port speed and duplex setting or Down when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation. This field displays Down when
the line is disconnected.
For the 2.4GHz or 5GHz WLAN, it displays the maximum transmission rate when the
WLAN is enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total time the EMG3425-Q10A has been for each session.
This is the total time the EMG3425-Q10A has been on.
Enter the time interval in seconds for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Click Stop to stop refreshing statistics.
EMG3425-Q10A User's Guide
54

Advertisement

Table of Contents
loading

Table of Contents