Table of Contents
Advertisement
Figure 102 Management > USB Media Sharing > SAMBA
The following table describes the labels in this screen.
Table 70 Management > USB Media Sharing > SAMBA
LABEL
DESCRIPTION
Enable SAMBA
Select this to enable file sharing through the EMG3425-Q10A using Windows Explorer or
by browsing to your work group.
Name
Specify the name to identify the EMG3425-Q10A in a work group.
Work Group
You can add the EMG3425-Q10A to an existing or a new workgroup on your network.
Enter the name of the workgroup which your EMG3425-Q10A automatically joins. You
can set the EMG3425-Q10A's workgroup name to be exactly the same as the workgroup
name to which your computer belongs to.
Note: The EMG3425-Q10A will not be able to join the workgroup if your local area
Description
Enter the description of the EMG3425-Q10A in a work group.
USB1/2
Specify the user's access rights to the USB storage device which is connected to the
EMG3425-Q10A's USB port.
Read & Write - The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read - The user has read rights only and can not create or edit the files on the
connected USB device.
User Accounts
Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
#
This is the index number of the user account.
Chapter 23 USB Media Sharing
network has restrictions set up that do not allow devices to join a workgroup. In this
case, contact your network administrator.
EMG3425-Q10A User's Guide
168
Advertisement
Table of Contents
