Table of Contents
Advertisement
the
desired delay number is displayed.
EXAMPLE:
This is set-up for 10 pieces in a Batch with a 1.5 second
delay between Batches.
3.
To return back to RUN mode, Press
Time Delay to Zero and the Folder will run continuously.
STOP FEED
In Batch Count Mode, you also can have the Feeder Set-Up for a Stop Feed Count. You can enter
the number of Sheets that you wish to Feed and the Feeder will Feed that number and STOP.
The feeder will not Re-Start until you Press SHEET START Button.
1.
Press the
Control Panel will appear.
A.
In the first 3 digits of the 8 digit display enter the Number of
Sheets that you wish the Feeder to Feed by Pressing either
or
B.
In the Last 2 digits of the 8 digit display, Press and HOLD
the
now Feed only the Number of Sheets that you have entered.
EXAMPLE:
or
Buttons directly UNDER the 2 digit display until the
Button on the Control Panel, the 3 display functions on the
Buttons.
Button until the LETTERS
With this setting the Feeder will run 10 sheets
and Stop Feeding.
Button and set either the Batch Size or
appears – the machine will
PAGE 19
TP10243-3
Advertisement
Table of Contents
