Table of Contents
Advertisement
To get out of the Machine Parameter Settings Mode, Press
return to normal operations.
BATCH COUNTING SETUP
To enter Batch Count Set-Up, Press
1.
This will bring up 3 display functions on the Control Panel.
First is the Small 3 digit display – this display must show
If the display shows any other Mode, the Batch Counter
will not function. To change, Press the
UNDER the 3 digit display to change this Mode of Operation.
NOTE: If the display shows
selected. These batching devices are Options not sold as standard equipment.
2.
In the Large 8 digit display you will see 2 display functions.
1
1.
Is the number of sheets in the batch.
2.
Is the time delay between batches.
A.
In the first 3 digits of the 8 digit display, this is the number of Sheets in each batch.
To adjust the number, press the
the display until the desired number is displayed.
B.
In the last 2 digits of the 8 digit display, is the time between batches
setting. This setting moves in Tenth (10
TP10243-3
or
oo
ooo
o
or
2
or
th
) of Seconds, to adjust, Press
PAGE 18
again. The displays will
ood
Buttons directly
the wrong batching device is
Button directly UNDER
Advertisement
Table of Contents
