Mounting Bracket Kits - HP flexnetwork 5510 hi series Installation Manual

NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack by using the mounting brackets.

Mounting bracket kits

Table 6 Mounting bracket kits for the HPE 5510 HI switches
Mounting bracket kits
Front mounting bracket kit
Rear mounting bracket kit
Chassis rail and slide rail
Grounding cable
Figure 4 Front mounting bracket kit
(1) Hole for attaching the bracket to the switch
chassis
Figure 5 Rear mounting bracket kit and load-bearing screw
(1) Hole for attaching the bracket to a rack
HPE 5510 24G SFP 4SFP+
HI
HPE 5510 24G 4SFP+ HI
HPE 5510 48G 4SFP+ HI
Provided
Not required
Not required
Provided
(2) Hole for attaching the bracket to a rack
(2) Load-bearing screw
8
HPE 5510 24G PoE+ 4SFP+
HI
HPE 5510 48G PoE+ 4SFP+
HI
Provided
Provided
Not required
Provided