Fastening The Rail To The Front Of The Rack; Fastening The Rail To The Rear Mounting Bracket; Installing The Filler Panel - HP StorageWorks SN6000 Installation And Reference Manual

5. Fasten each rail flange to the front of the rack using two M6 machine screws
Figure 16

Fastening the rail to the front of the rack

6. Fasten each slotted-rail end to the rear mounting bracket using a flat washer and a 1/4-20 hex nut
(Figure 17).
Figure 17

Fastening the rail to the rear mounting bracket

7. Optional: Fasten the filler panel to the rear mounting brackets with two M6 machine screws
Figure 18

Installing the filler panel

38
(Figure 16).
(Figure 18).