10/100/1000Base-T Autosensing Ethernet Port; 100/1000Base-X Sfp Port - HP flexnetwork 5510 hi series Installation Manual

10/100/1000Base-T autosensing Ethernet port

Table 15 10/100/1000Base-T autosensing Ethernet port specifications
Item
Connector type
Interface attributes
Max transmission
distance
Transmission medium
Standards

100/1000Base-X SFP port

The HPE 5510 24G SFP 4SFP+ HI switch provides 24 fixed SFP ports on the front panel. You can
install the 100 Mbps SFP modules in
17 in the SFP ports.
Table 16 100 Mbps SFP transceiver modules available for the 100/1000 Base-X SFP ports
Produc
t code
JD102B
JD120B
JD090A
JD100A
JD101A
Specification
RJ-45
•
10 Mbps, full duplex
•
100 Mbps, full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X, auto-sensing
100 m (328.08 ft)
Category-5 (or above) twisted pair cable
IEEE 802.3i, 802.3u, 802.3ab
HPE description
HPE X115 100M
SFP LC FX
Transceiver
HPE X110 100M
SFP LC LX
Transceiver
HPE X110 100M
SFP LC LH40
Transceiver
HPE X110 100M
SFP LC BX 10-U
Transceiver
HPE X110 100M
SFP LC BX 10-D
Transceiver
Table 16 and the 1000 Mbps SFP transceiver modules in
Central
wavelengt Connector
h (nm)
1310 LC
1310 LC
1310 LC
TX: 1310
LC
RX: 1550
TX: 1550
LC
RX: 1310
56
Fiber diameter
(µm)
Multi-mode, 50/125
Multi-mode, 62.5/125
Single-mode, 9/125
Single-mode, 9/125
9/125
9/125
Table
Max
transmissio
n distance
2 km (1.24
miles)
15 km (9.32
miles)
40 km (24.86
miles)
15 km (9.32
miles)
15 km (9.32
miles)