Hpe 5510 24G 4Sfp+ Hi - HP flexnetwork 5510 hi series Installation Manual

The HPE 5510 24G SFP 4SFP+ HI switch comes with a filler panel in the interface card slot. You can
select an interface card for the switch as required. In this figure, an LSWM2SP2PM interface card is
installed in the interface card slot. For more information about installing and removing an interface
card, see "Installing/removing an interface

HPE 5510 24G 4SFP+ HI

Figure 48 HPE 5510 24G 4SFP+ HI front panel
(1) 10/100/1000Base-T autosensing Ethernet port
(3) Management Ethernet port
(5) Mini USB console port
(7) USB port
(9) SFP+ port
(11) Interface card status LED (SLOT)
(13) Power supply 1 status LED (PWR1)
(15) Management Ethernet port LED
Figure 49 HPE 5510 24G 4SFP+ HI rear panel
1
(1) Grounding screw
(3) Fan tray 1
(5) Power supply 1
The HPE 5510 24G 4SFP+ HI switch comes with power supply slot 1 empty and power supply slot 2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
this figure, two PSR150-A1 (JD362B) AC power supplies are installed in the power supply slots. For
more information about installing and removing a power supply, see
supply."
The HPE 5510 24G 4SFP+ HI switch comes with a filler panel in the interface card slot. You can
select an interface card for the switch as required. In this figure, an LSWM2SP2PM interface card is
installed in the interface card slot. For more information about installing and removing an interface
card, see "Installing/removing an interface
2 3
card."
(2) 10/100/1000Base-T autosensing Ethernet port LED
(4) Console port (CONSOLE)
(6) Port LED mode switching button
(8) System status LED (SYS)
(10) LED for the port LED mode (MODE)
(12) Power supply 2 status LED (PWR2)
(14) SFP+ port LED
4 5
(2) Interface card (optional)
(4) Fan tray 2
(6) Power supply 2 (optional)
card."
45
6
"Installing/removing a power