Caution In Handling Of Ink Bottles - MIMAKI SWJ-320 S2 Operation Manual

As for the ink IC chip
One ink IC chip is enclosed by one ink bottle.
Marking is applied to the contact side so that each ink color can
be recognized.
About ink expiration date
The ink bottle has its expiration date.
You can use the bottle in two months after the expiration date indicated on it, however, you cannot use it when
three months have passed from the expiration date.
Ex.) When the expiration date is April 2012
May: Usable
June: Usable
July: Unusable
About ink end and ink near end
When the ink remaining amount becomes less, "Ink near end" occurs. Ink replacement is recommended early.
When no more ink is available, the printing is interrupted. Replace the inkbottle with a new one.

Caution in handling of ink bottles

• If you get ink in your eyes, immediately wash your eyes with a lot of clean running water for at least 15
minutes. In doing so, also wash the eyes to rinse ink away completely. Then, consult a doctor as soon
as possible.
• Use genuine ink bottles for this machine. In case of troubles caused by modified ink bottles or the like,
it shall be out of the warranty even within the warranty period.
• If the ink bottle is moved from a cold place to a warm place, leave it in the room temperature for three
hours or more before using it.
• Make sure to store ink bottles in a cool and dark place.
• Store ink bottles and waste ink tank in a place that is out of the reach of children.
• Request an industrial waste processor for processing of empty ink bottles.
• Do not shake ink bottles violently. This may result in ink leakage from the ink bottles.
• Never refill the ink bottles with ink. This may result in troubles.
MIMAKI will not bear any responsibility for any damage caused by the use of the ink bottles refilled
with ink.
• Do not touch or stain the contacts of the Ink IC chip. This may cause damages on printed circuit
boards.
1-12
Ink bottle replacement and charging
Contacts
of IC chip
Cyan
Magenta
Yellow
Black