Table of Contents
Advertisement
Important Safety Instructions
Read the instructions.
•
Keep the instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with
•
manufacturer's instructions
Do not install near any heat sources such as radiators, heat registers, stoves,
•
or other apparatus (including amplifiers) that create heat.
Protect the power cord from being walked on or pinched particularly at plugs,
•
convenience receptacles, and at the point where they exit from the apparatus.
Only use the attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified service personnel. Servicing is required when
•
apparatus has been damaged in any way. Such as power-supply cord or plug is
damaged. Liquid has been spilled or objects have fallen into the apparatus.
The apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
The mains switch on the amplifiers only switches one pole of the mains
•
supply, therefore for units with a detachable cord to be fully disconnected from
the mains, the mains disconnect device (i.e. mains plug or mains coupler)
should remain readily operable. For units with a fixed mains lead the external
all pole circuit breaker with 3mm breaking distances is the disconnect device
and therefore the installation of the amplifier shall be carried out in accordance
with all the applicable installation rules.
Amplifier Operator's Manual
Page 7
Advertisement
Table of Contents
