Layout Of The Main Window - MC2 Audio ti series Instruction Manual

None the less, the entire process will take approximately 90 seconds to complete.
As the search continues, the device view should begin to fill up with connected
units. When complete, depending on what's connected of course, there should
now be a "rack" of devices like this:
Device View Window
Virtual rack shows all connected
units - double click on any device
to open it's detailed view in the
main window

Layout of the Main Window

A double click on any device will display its "front panel" for editing of audio
properties. Non-audio properties are shown in the "Properties Window" on the
right hand side of the main window.
Amplifier Operator's Manual
System Monitor Window
Every amplifier is represented here with a
temperature readout and comms status
indicator - double click on any device as
for the Device View window to select it
Properties Window
View and edit all non-audio
parameters on the selected
device
An amp control
panel - currently
active and in
stereo
Breakout box
control panel
Page 27