Table of Contents
Advertisement
An example of this equipment has been tested and found to comply with
the following European and international Standards for Electromagnetic
Compatibility and Electrical Safety:
Radiated Emissions (EU):
RF Immunity (EU):
Electrical Safety (EU):
Important Safety Information
This unit is fitted with a 3-wire power connector. For safety reasons, THE EARTH
LEAD SHOULD NOT BE DISCONNECTED IN ANY CIRCUMSTANCE. If ground loops
are encountered consult the section on input connections later in this manual.
WHERE A FIXED MAINS LEAD IS FITTED, THE WIRING COLOURS ARE:
230V AREAS:
120V AREAS:
TO PREVENT THE LIKELIHOOD OF SHOCK OR FIRE HAZARD, DO NOT EXPOSE
THE UNIT TO RAIN OR MOISTURE.
DO NOT PLACE OBJECTS CONTAINING LIQUID ON TOP OF THE APPARATUS.
TO AVOID ELECTRICAL SHOCK DO NOT REMOVE COVERS. REFER ALL SERVICING
TO QUALIFIED PERSONNEL.
DO NOT USE THE UNIT IF THE ELECTRICAL POWER CORD IS FRAYED OR
BROKEN. The power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular
attention to cords and plugs and the point where they exit from the appliance.
ALWAYS OPERATE THE UNIT WITH THE AC GROUND WIRE CONNECTED TO THE
ELECTRICAL SYSTEM GROUND. Precautions should be taken so that the means of
grounding of a piece of equipment is not defeated.
[DO NOT REMOVE THE LID. Removing the lid will expose you to potentially
dangerous voltages. There are no user serviceable parts inside.]
Breakout Operator's Manual
EN55013-1 (1996)
EN55103-2 (1996) RF Immunity, ESD, Burst Transient,
Surge, Dips & Dwells
EN60065 (1993)
EARTH
=
NEUTRAL
=
LIVE
=
EARTH
=
NEUTRAL
=
LIVE
=
GREEN & YELLOW
BLUE
BROWN
GREEN
WHITE
BLACK
Page 5
Advertisement
Table of Contents
