Lenovo ThinkStation P310 User Manual page 92

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 101.
Replacing the solid-state drive
To replace the solid-state drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 54.
3. Locate the desired hard-disk-drive bay. See "Internal drives" on page 7.
4. Disconnect the signal cable and power cable from the solid-state drive.
5. Remove the storage converter with the solid-state drive from the hard-disk-drive bay. See "Replacing
the primary hard disk drive" on page 90 or "Replacing the secondary hard disk drive" on page 92.
6. Flex the sides of the plastic 3.5-inch hard-disk-drive bracket to remove the storage converter from
the bracket.
Figure 59. Removing the storage converter from the 3.5-inch hard-disk-drive bracket
80
ThinkStation P310 User Guide