Lenovo ThinkStation P310 User Manual page 81

b. Pull the clip as shown to remove the card reader with its retaining bracket out of the flex module.
Figure 36. Removing the card reader from the flex module
c. Flex the four clips on the sides of the card-reader retaining bracket to remove the card reader
from the bracket.
Figure 37. Removing the card reader from the card-reader retaining bracket
4. To install a new card reader into the card-reader retaining bracket, align the four holes in the card
reader with the corresponding studs on the bracket. Then press the new card reader downward until
it snaps into position.
Figure 38. Installing the card reader into the card-reader retaining bracket
.
Chapter 7 Installing or replacing hardware
69