Installing Or Replacing The Solid-State Drive - Lenovo ThinkStation P310 User Manual

2. If you are replacing an old slim optical drive, press the clip on the top of the enclosure as shown and
push forward the slim optical drive. Then, slide the slim optical drive out of the front of the enclosure.
Figure 55. Removing the slim optical drive from the enclosure
3. Insert a new slim optical drive into the enclosure until you hear a click. The slim optical drive is secured
in place.
Figure 56. Installing the slim optical drive in the enclosure
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 101.

Installing or replacing the solid-state drive

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
Installing the solid-state drive
To install the solid-state drive, do the following:
78
ThinkStation P310 User Guide