5. Install the screws to secure the computer cover.
6. Place the computer in an upright position.
7. If a locking device is available, lock the computer cover. See "Locking your computer" on page 27.
8. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 1.
9. Update the configuration of your computer. See "Using the Setup Utility program" on page 31.
10. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping your computer current" on page 24.
.
Chapter 7
Installing or replacing hardware
103