7. Pull the blue handle to slide the hard disk drive out of the drive cage.
Figure 73. Removing the primary hard disk drive
8. Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
9. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin
4
on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board
5
on the bottom of the hard disk drive.
Figure 74. Installing the hard disk drive into the bracket
1
, pin
.
Chapter 7
Installing or replacing hardware
2
, pin
3
,
91