Hunter DSP9200 Series Operation Instructions Manual page 43

DSP9200 Series Balancer Operation Instructions
If using a manual Dataset
necessary) to change display to show distance to the weight plane (right
or left) for the weight being placed.
®
Pull Dataset arm out until the scale reading and the display right plane
distance reading are the same.
Find BDC for right plane as shown below.
Attach adhesive weight at BDC in-line with the Dataset
Aided Weight Placement or manual Dataset
RIGHT PLANE BDC
(BLINKING)
If necessary, use the
Verify balance condition by spinning again. Display should show "zero."
Balancing procedure is complete.
®
arm, press the
®
arm as described above.
"Right Plane Split Weight
"Next" button (if
®
arm disc edge, using Servo
®
" to split weight.
3. Balancing a Wheel x 39