Mixed Weights And Two Adhesive Weights (Inputting Distance And Diameter For Both Planes) - Hunter DSP9200 Series Operation Instructions Manual

Mixed Weights and Two Adhesive Weights (Inputting Distance and
Diameter for Both Planes):
Mixed Weights
DSP9200 Series Balancer Operation Instructions
®
The inner Dataset arm will trigger as it is raised from the home resting position (left
plane green LED "weight" will blink as a prompt). Place the pointer tip or pointer disc
edge at the desired left plane weight location, and step on the foot pedal. The
reading will be taken and the display will update the left plane weight position.
Right plane green LED will now blink as a prompt for the right plane weight to be input.
Before returning the inner Dataset
at the desired right plane weight location and step on the foot pedal. The weight
position will be taken and the display will automatically change to show the right
weight LED and the new right plane weight dimensions.
A confirmation beep occurs, the readouts change to the newly acquired values and
the prompt stops flashing.
The dimension digits will now blink a prompt for optional "Split Spoke
to "Split Spoke® Feature," page 53, or return the arm to the home position.
Two Adhesive Weights
®
arm to the storage position, place the disc edge
®
" mode. Refer
3. Balancing a Wheel x 27