Using Wheel Dimension Control Knobs - Hunter DSP9200 Series Operation Instructions Manual

Using Wheel Dimension Control Knobs

12 x 1. Getting Started
Press the "Left Plane Split Weight
®
Refer to "Split Weight Feature," page 51.
Press the "Oz/Gm" button to view balancing weights in ounces or grams.
Press the "Right Plane Split Weight
Plane. Refer to "Split Weight
Press the "CenteringCheck
the tire/wheel assembly on the balancer shaft. Refer to "CenteringCheck
The control knobs are located to the left of the control panel. The control knobs are
used to manually input wheel dimension data. The control knobs are identified as the
distance, width, and diameter control knobs.
Wheel dimension control knobs are used for manual data entry when required.
Changes to wheel dimensions are made by rotating the knobs. The control knobs are
digital encoder design and variable speed. Rotating slowly will change increments in
single digits. Rotating quickly will advance and move increments at an increased rate.
®
" button to split weights on the Left Plane.
®
" button to split weights on the Right
®
Feature," page 51.
®
" button to check the accuracy of the mounting of
DSP9200 Series Balancer Operation Instructions
®
," page 25.