Hunter DSP9200 Series Operation Instructions Manual page 38

34 x 3. Balancing a Wheel
Measure and enter the wheel width as shown below:
RIM WIDTH
This measurement can be input automatically, if the DSP9200 is equipped with the
optional auto inner and/or outer Dataset
Inner and Outer Auto Dataset
Close safety hood and spin wheel.
After wheel stops, raise safety hood.
Find TDC for left plane and attach weight.
LEFT PLANE TDC
If necessary, use the
Find TDC for right plane and attach weight.
If necessary, use the
OR
®
arms. Refer to "Measuring the Wheel with
®
Arm(s)," page 26.
"Left Plane Split Weight
RIGHT PLANE TDC
"Right Plane Split Weight
DSP9200 Series Balancer Operation Instructions
®
" button to split weight.
®
" button to split weight.