System Time; Manually Setting System Time; Figure 18. System Time Page - Allied Telesis AT-FS750/20 User Manual

System Time

Manually Setting
System Time
The procedures in this section describe how to configure the system time
by manually entering the time or through SNTP and how to configure the
daylight savings time feature. See the following sections:


"Manually Setting System Time"

 "Setting SNTP" on page 50

"Setting Daylight Savings Parameters" on page 52
To set the system time manually, perform the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select System Time.
The System Time Page is displayed. See Figure 18.
FS750 Series Fast Ethernet WebSmart User's Guide

Figure 18. System Time Page

49