Establishing A Remote Connection To The Web Browser Interface; Figure 1. Entering A Switch's Ip Address In The Url Field; Figure 2. Management Login Dialog Box - Allied Telesis AT-GS950/16PS User Manual

Chapter 1: Starting a Web Browser Session

Establishing a Remote Connection to the Web Browser Interface

22
The AT-GS950/16PS switch is shipped with a pre-assigned IP address of
192.168.1.1. After your initial login, Allied Telesis suggests that you assign
a new IP address to your switch. To manually assign an IP address to the
switch, refer to "Configuration of IP Address, Subnet Mask and Gateway
Address" on page 30. To configure the switch to obtain its IP configuration
from a DHCP server, refer to "DHCP Client Configuration" on page 45.
Whether you use the pre-assigned IP address or assign a new one, you
must set your local PC to the same subnet as the switch.
To start a web browser management session, perform the following
procedure:
1. Start your web browser.
2. In the URL field of the browser, enter 192.168.1.1.
This is the default IP address of the switch. See Figure 1.
Switch's IP Address

Figure 1. Entering a Switch's IP Address in the URL Field

The AT-S112 Management Software displays the login dialog box. See
Figure 2.

Figure 2. Management Login Dialog Box

3. Enter the AT-S112 management login user name and password.