Table of Contents
Advertisement
Saving Your Configuration In A Custom Set
Configuration
Management
Recall
Save Current
Custom Set
Values
1*
2
3
4
5
6
7
8
Name
Custom Sets
Once you have changed all of the necessary parameters, it is recommended
you save them as a configuration that can be stored and loaded later for
future use. You can save your configurations to meet different print job
requirements.
The saved configurations (called custom sets) are stored in NVRAM—they
will not be lost if you power off the printer.
Later, you can load one of the configurations for a specific print job. This
eliminates the need to change settings, such as CPI and LPI, for each new
job. See page 46 for details on loading configurations.
You may want to print records of your configurations (see page 39) and store
them in a safe place, such as inside the printer cabinet.
Saving Your Configuration In A Custom Set
Delete
Custom Set
Power On Set
Reset
Custom Set
Names
Entering Program Mode
* = Factory Default
Change
Protect
Custom Sets
Print Custom
Set Values
43
Advertisement
Table of Contents
