Operator Print Tests Menu - InfoPrint 6500 DBCS User Manual

Chapter 4

Operator Print Tests Menu

Operator Print Tests Menu
Operator Print
Tests
(from page 52)
Printer Print Error
Demonstration
All E's + FF
Underlines
NOTE:
1
The Adapter Test Page is only available with the
Ethernet Adapter feature installed.
2
The Ethernet Test Page is only available with the
Integrated Ethernet feature installed.
The print tests are used to check the print quality and operation of your
printer. The procedure to run these tests is shown on page . The self–tests
include the following:
Printer Demonstration
(The default). Demonstrates some of the functions and features available on
the printer.
Print Error Log
Prints a log of errors that have occurred in the printer.
Print Ribbon Log
Prints a log of 100 previously depleted ribbons and identifies them should
they be re-installed on the same printer.
110
Print Ribbon
Log Log
Adapter Test
1
Page
Ripple All E's
Print
Ethernet Test Clear Error
2
Page Log
To cycle through the menus and its
options, press MENU then:
Scroll/
OR
Micro
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
All H's
Scroll/
Micro