How To Identify The Printer; Ribbonminder - InfoPrint 6500 DBCS User Manual

Cabinet and pedestal

Table of Contents

Chapter

Printer Overview

How To Identify The Printer

The model number of the printer indicates the printer family, rated maximum

print speed, and type of enclosure. (See Figure 1.)

InfoPrint 6500-D Printer Family

Figure 1. Printer Model Number Interpretation

The 6500-D has a new feature that automatically monitors and communicates

ribbon life. Using a specially barcoded spool, the printer can automatically

detect when a new or used ribbon is loaded, and all ribbon properties. With a

sophisticated algorithm, the system monitors all jobs printed and

automatically updates the remaining ribbon life on the front panel display. This

allows the system administrator to have precise control over print quality and

consumable costs. The accurate presentation of available ribbon life allows

for efficient planning of print jobs. For example, you can install a new ribbon

before printing large print jobs.

When the ribbon life gets near the end point, the printer displays a ribbon low

message and flashes the indicator light. Printing will continue without

interruption. Once the ribbon reaches 0% remaining, the alarm sounds, the

indicator light flashes, the display updates, and printing pauses. If a new

ribbon is loaded, the system automatically detects the change, clears the

condition, and restarts the life at 100%. If it is not convenient to change the

ribbon immediately, cycle the printer on and offline and it will resume printing

for a few minutes. This should be enough to complete the job. If not, repeat

the same procedure indefinitely to extend printing on the same ribbon.

Speed Rating:

D3C = 300 LPM

D3P = 300 LPM

D6C = 600 LPM

D8C = 800 LPM

6500-D3P

Letter Code:

P = Pedestal Model

C = Cabinet Model

Table of Contents