Avaya E159 Installing And Maintaining page 52

Initial setup and connectivity
3. Plug the USB cable into the left USB port on the rear of the media station.
Connecting the handset
Procedure
1. Plug the handset cable into the right USB port on the rear of the media station. Route the
cable through the channels under the media station.
2. Put the handset cradle on top of the media station. Put the handset in the handset cradle.
Position the cradle so that the magnets secure the holder on the media station.
Note:
If more convenient for you, you can put the handset cradle and handset on any location
on your desk. Regardless of placement, the handset must rest in the handset cradle.
Installing and Maintaining the Avaya E159 and E169 IP Media Stations
52
Comments? infodev@avaya.com
February 2015