Beo4 Remote Control - Bang & Olufsen BeoSystem 1 User Manual

8
Switch on the TV or Satellite source of
your choice and step through your
channels.
If you watch your programmes via
digital receivers or cable boxes, you
can operate the available channels
and services they may offer via the

Beo4 remote control.

Specific menu overlays* are available
for each of the receivers or boxes
which are registered and compatible
with BeoSystem 1. The menu overlays
show the functions available, as well
as the set of Beo4 buttons that give
you access to those functions.
If you have connected a satelite
receiver, you must register it in the
EXTERNAL SOURCES menu. Please
refer to Register equipment
connected to BeoSystem 1 for
information about registering
connected equipment.
*NOTE! For further information about the menu
overlays available for the different types of boxes,
please refer to the enclosed Product List.
Watch TV or Satellite programmes
Watch TV or SAT channels
Once you have selected your TV source and
specific channel type, you can use Beo4 to
step between the available channels or enter
the channel number. To watch television
channels received via Satellite, press SAT. To
watch a specific Satellite channel, enter the
channel number.
TV Switch on TV channels
TV CABLE
Step through available TV
▲
channels one by one
▼
SAT Switch on Satellite channels, if
these are available in your setup
SAT
0 – 9 Use the number keys to select a
specific channel. This applies to
both TV and Satellite channels
• Switch the system to standby
Selected functions for TV or SAT
Use the Beo4 remote control to operate
selected functions via menu overlays. Each
menu overlay is not explained in detail. The
operations described below apply to all
receivers or cable boxes, but the functions
activated will vary.
TV Press TV to switch on TV
TV STB channels, or...
SAT ...press SAT to call up your
Satellite channels
SAT
MENU Call up the menu overlay for the
selected source
Press a coloured button on Beo4
to activate a function shown in
the menu overlay
0 – 9 Press the number keys to activate
a numbered function or service
in the menu overlay
In menus or services...
Move the cursor in the desired
▲
direction or to the desired option
▼
ss tt
0 – 9 Use the number keys to enter
information in menus or services
when relevant
GO Select an option in a menu
EXIT Return to watching television
• Switch the system to standby