Bang & Olufsen BeoSystem 1 User Manual page 44

44
Determine which or how many
loudspeakers you want to switch on
when you e.g. watch the news or a
movie.
You can preset the speaker mode,
i.e. preset the number of speakers
you want cut in for different video
sources, or you can select alternative
speaker modes at any time*.
The number of available speaker
modes depends on how many
speakers you have in your setup.
There are five speaker modes in all.
To be able to enjoy all the speakers
in a surround sound setup – a
subwoofer, two front, two center
and two rear speakers – you must
choose a source that is encoded with
Dolby surround sound.
*NOTE! If you watch a movie, DVD or broadcast
encoded with DTS or Dolby Digital, then the
appropriate speaker mode is selected
automatically. This ensures optimum sound
quality. If you choose to select a speaker mode
manually, you may experience reduced sound
quality.
Speaker setup and sound system
Preset a speaker mode
You can preset a speaker mode to be cut in
automatically when you switch on video
sources, such as TV or VCR. Only speaker
mode 3 and 5 are available to preset. They
apply to video sources only.
TV SETUP
1 SOUND
2 PICTURE
1 ADJUSTMENT
3 CLOSED CAPTIONING
2 SPEAKER TYPE
4 PARENTAL CONTROL
3 SPEAKER DISTANCE
5 RECORD LOCK
4 SPEAKER LEVEL
6 EXTERNAL SOURCES
5 SPEAKER MODE
7 FIRST TIME SETUP
6 SOUND SYSTEM
8 RF / CHANNEL SETUP
select
SPEAKER MODE
VIDEO
When BeoSystem 1 is switched on...
Press MENU to call up the main TV SETUP menu.
SOUND
Press GO to call up the SOUND menu.
Press 5 to call up the SPEAKER MODE menu.
ss tt
Press to adjust the setting for VIDEO.
SPEAKER 3 or SPEAKER 5 are available.
Press GO to store your setting.
Press EXIT or a source button, e.g. TV or SAT, to
exit on-screen menus.
select
SPEAKER 3
store