Bang & Olufsen BeoSystem 1 User Manual page 6

6
The Beo4 remote control integrates
remote operation of BeoSystem 1
with any supported source you
choose to connect to your
BeoSystem 1
Switch on BeoSystem 1 and your TV channels
Switch on the BeoSystem 1 and your Satellite
receiver to watch Satellite channels
Switch on BeoSystem 1 and a connected VCR.
Videotape playback starts at the same time
Press twice to start a recording here and now
Press to activate closed captioning
The Beo4 display – shows the current source, TV,
or extra sources or buttons called up via the LIST
Reveal more sources or functions in the Beo4
display, e.g. FORMAT
Press once to pause VCR or DVD playback or
pause a recording. Press again to stop paused
playback or recording completely. Press to return
to a previous on-screen menu
Adjust volume – press the middle to mute the
Your key to using BeoSystem 1
Buttons on the Beo4 remote control
Look through the basic principles of the Beo4
remote control and try them out. Each button
on Beo4 is explained below.
TV
SAT
V TAPE
RECORD
TEXT
TV LIGHT
TV
SAT DVD
FORMAT
V TAPE RECORD
button
LIST
7 8
4 5
STOP
1 2
TEXT 0
∧
GO
∨
sound
LIST
STOP
RADIO Switch on radio, CD, or audio cassette (A TAPE) if
CD these audio sources are available
A TAPE
DVD Switch on BeoSystem 1 and a connected DVD
player. DVD playback starts at the same time
LIGHT Adjust the lights (if a light control system is
installed)
0 – 9 Select channels or enter data in on-screen menus
RADIO
MENU Call up a menu overlay to be able to operate a
CD
specific function for a source. Press again to call
A TAPE
up the main on-screen menu
Step between channels or e.g. tracks on a DVD or
▲
9
audio CD. Move up and down through on-screen
▼
6
menu options
3
ss tt
Rewind or fast forward a video cassette. View
MENU
available settings in a fill-in menu
GO Accept and store instructions or settings; resume
paused playback or recording
The coloured buttons give you access to different
functions, depending on the source you have
selected
EXIT
EXIT Exit on-screen menus
• Switch BeoSystem 1 to standby