Bang & Olufsen BeoSystem 1 User Manual page 24

24
BeoSystem 1 is intended for use with
a plasma screen*. However,
BeoSystem 1 supports the use of
other types of screens, as well as the
use of a front or rear projector.
You can also connect a Home
automation system to your
BeoSystem 1, and thereby control
room lights and curtains when
BeoSystem 1 is switched on or off.
The diagrams on the facing page
show BeoSystem 1 in a setup with,
respectively, a plasma screen, a
projector and a Home automation
system. Multiple screens cannot be
connected at the same time.
The connections and sockets on
BeoSystem 1 which should be used
are illustrated in the diagrams.
*NOTE! If you intend to use BeoSystem 1 with a
plasma screen, please refer to the screen's own
manual for instruction in how to handle and
place your screen.
Connect a screen to BeoSystem 1
PROJ. OUT
IR / DATA
DATA
It is only possible to connect a Home automation
system to your BeoSystem 1 in a setup with a
front or rear projector.