Activate Parental Control - Bang & Olufsen BeoSystem 1 User Manual

46
Parental control can be switched on
or off. Choose which system you
want to apply: TV parental guidelines
or the MPAA rating system.
If you assign an access code and
switch parental control on, you will
be required to enter this access code
whenever you want to watch a
programme or channel that has been
blocked.
Whenever a blocked programme or
channel is selected, your screen goes
blank, the sound is shut off and an
on-screen menu prompts you to
enter your access code.
If you wish to change or override
your settings, the access code is also
required.

Activate parental control

Assign an access code
To make full use of the parental control
system, begin by assigning an access code. This
restricts access to the programmes and
channels with broadcasted restrictions, and
prevents the settings from being changed by
others. Choose a code that is easy to
remember. The default setting is 0000.
TV SETUP
1 SOUND
2 PICTURE
3 CLOSED CAPTIONING
4 PARENTAL CONTROL PARENTAL CONTROL
1 TV PARENTAL GUIDELINES
5 RECORD LOCK
6 EXTERNAL SOURCES
2 MPAA RATING
7 FIRST TIME SETUP
3 ACCESS CODE
8 RF / CHANNEL SETUP
select
ACCESS CODE
OLD CODE
NEW CODE
CONFIRM CODE
When e.g. TV is switched on...
> Press MENU to call up the main TV SETUP
menu.
> Press 4 to call up the PARENTAL CONTROL
menu.
> Press 3 to call up the ACCESS CODE menu.
OLD CODE is already highlighted.
> Use the number buttons on Beo4 to enter the
default code (0000).
> Move the cursor down to NEW CODE and enter
a new code.
> Enter the new code once more to confirm it.
> Press GO to store the code.
> Press EXIT or a source button, e.g. TV, SAT to
select
exit on-screen menus.
To change your code at any time, follow the
procedure described above. If, for some reason,
. . . .
you have forgotten your code, then you can key in
. . . .
9999 three times when OLD CODE is highlighted.
. . . .
This allows you to enter a new code.
store