Bang & Olufsen BeoSystem 1 User Manual page 12

12
Record TV programmes from the
VCR
The channels you wish to record must be
stored in the VCR tuner, as well as in the
BeoSystem 1 tuner*. The recording is
controlled by the VCR. For further information
about recording, please refer to the VCR's
own user's guide.
V TAPE Press to switch on the VCR
STOP Pause the VCR, if necessary
RECORD Press to be able to start a
recording
RECORD Press to start recording. RECORD
is shown on the screen
RECORD
During recording you can...
• ...switch BeoSystem 1 to
standby. The recording continues
V TAPE Return to the recording
STOP Press to stop the recording
*NOTE! To ensure that recording takes place,
remember to set the input selector correctly on
the VCR.
>> Using a VCR via Beo4 – recording
Record lock a source
You can ensure that there is a signal between
BeoSystem 1 and your VCR when you preset a
timed recording via a Satellite receiver, a
set-top box or equipment connected to the
V AUX sockets on BeoSystem 1. Via the
RECORD LOCK menu, you can lock the VCR on
to the source you want to record from.
TV SETUP
1 SOUND
2 PICTURE
3 CLOSED CAPTIONING
4 PARENTAL CONTROL
RECORD LOCK
5 RECORD LOCK
6 EXTERNAL SOURCES
SOURCE LOCKED
7 FIRST TIME SETUP
8 RF / CHANNEL SETUP
select
> Press MENU to call up the main TV SETUP
menu.
> Press 5 to call up the RECORD LOCK menu.
ss tt
> Use to select which source to lock – only
available sources will appear.
> Press GO to store the source or input you have
chosen.
SAT
> Press EXIT or a source button, e.g. TV or SAT,
to exit on-screen menus.
store