Sound Control; Volume Adjustment - Bang & Olufsen BeoLink Active User Manual

Bang & olufsen beolink active kit loudspeakers user's guide
Hide thumbs Also See for BeoLink Active:
Table of Contents

Advertisement

Sound control

The lower key marked PLAY • on the
BeoLink Active receiver enables you to
listen-in on a source that is currently
playing in your main Bang & Olufsen
system.
If no source is playing, pressing PLAY •
will switch on the radio* program that
was last playing.
No matter how, whenever you press
PLAY •, the sound from your main
system will be heard instantaneously in
your BeoLink Active room.
Press PLAY • again briefly, and the
BeoLink Active switches off – a small,
red light (stand-by indicator) appears in
the PLAY • key.
If you keep your finger on PLAY • for
two seconds, both the BeoLink Active
and your main system will switch off
simultaneously.
* Note: If your main system consists of a Bang &
Olufsen video system only (with no audio
sources), pressing PLAY • will switch on the TV
program that was last playing.
Note: If your main Bang & Olufsen system is in
stand-by when you switch on the BeoLink Active,
you will only get sound in the speakers in your
BeoLink Active room – the loudspeakers in your
main system will not be cut in.
C L O S E - U P
O P E R A T I O N
The small circular BeoLink Active receiver has
three keys for close-up operation...
Timer Play control
If you have programmed your main
Bang & Olufsen system to start playing
automatically (Timer Play) – for
example to wake you up in the
morning – the speakers in your BeoLink
Active room can be included as well.
To do so, just press the TIMER key on
the BeoLink Active receiver. A small red
light in the TIMER key indicates that
your BeoLink Active room will be
included as well, whenever your main
system starts playing a Timer Play
programming.
Press TIMER again to cut out the Timer
function (the red light disappears).

Volume adjustment

Volume is adjusted quite indepen-
dently of your main Bang & Olufsen
system.
By pressing the volume buttons
on the BeoLink Active receiver, you can
raise or lower the volume level in the
loudspeakers as you like.
Note: See page 9 for further information about
sound.
5
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents