HP Integrity NonStop i NS2300 Planning Manual page 63

1
For more information about CLIM processes that use the CIP subsystem and the naming conventions for these
processes, refer to the Cluster I/O Protocols (CIP) Configuration and Management Manual.
On new NonStop systems, only one of each of these processes and names is configured:
TCP6SAM - $ZTC0
Telserv - $ZTCN0
Listener - $LSN0
No TFTP or WANBOOT process is configured for new NonStop systems.
NOTE: Naming conventions or configurations for the dedicated service LAN TCP/IP are the
same as the TCP/IP conventions used with G-series and H-series RVUs. The names are $ZTCP0
and $ZTCP1. Hewlett Packard Enterprise does not support changing the names of these
processes.
OSM Service Connection provides the location of the resource by adding an identifying suffix to
the names of all the system resources. Other interfaces, such as SCF, also provide means to
locate named resources.
Default Naming Conventions 63