Uninterruptible Power Supply (Ups); Ac Input Power For Ns2300 Systems - HP Integrity NonStop i NS2300 Planning Manual

Uninterruptible Power Supply (UPS)

A NS2300 system can use the R5000 UPS for a single-phase power configuration or the R12000/3
UPS for a three-phase power configuration. An extended run-time module (ERM) can be combined
with a UPS to extend battery time. For more information, see

AC Input Power for NS2300 Systems

Power Specifications
Region
North America/Japan
International
CAUTION:
within the system do not exceed the capacity of the branch circuit according to applicable electrical
codes and regulations.
Select circuit breaker ratings according to local codes and any applicable regulations for the
circuit capacity. Note that circuit breaker ratings vary if your system includes an optional
rack-mounted UPS.
44 System Installation Specifications for NS2300 Systems
Phase
Single-Phase
Three-Phase
Single-Phase
Three-Phase
Be sure the hardware configuration and resultant power loads of each enclosure
"UPS and ERM (Optional)" (page
Refer to...
Table 1 (page 45)
Table 2 (page 45)
Table 3 (page 46)
Table 4 (page 46)
18).