Lenovo ThinkCentre M700 Hardware Maintenance Manual page 120

8. Squeeze the two retaining clips that secure the power button board and push the power button board
inward, and then remove it from the chassis.
Figure 49. Removing the power button board
9. On the inside of the front panel, insert one retaining clip on the new power button board into the hole
Then, press the other retaining clip into the hole
Figure 50. Installing the power button board
10. Connect the power button board cable to the system board. See "Parts on the system board" on
page 37.
11. Pivot the drive bay assembly downward. See "Pivoting the drive bay assembly upward and downward"
on page 93.
12. Reinstall the optical drive. See "Replacing the optical drive" on page 91.
13. Reinstall the front bezel. See "Replacing the front bezel" on page 88.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
112
ThinkCentre M700 Hardware Maintenance Manual
2
.
1
.