5. Pressing the retaining clip
Figure 21. Pivoting the drive bay assembly upward
6. Pressing the release tab
until it snaps into position.
Figure 22. Pivoting the drive bay assembly downward
7. Reinstall the optical drive. See "Replacing the optical drive" on page 91.
8. Reinstall the front bezel. See "Replacing the front bezel" on page 88.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 129.
94
ThinkCentre M700 Hardware Maintenance Manual
1
as shown, pivot the drive bay assembly upward.
1
on the drive bay assembly as shown, pivot the drive bay assembly downward