9. Remove the four screws
1
that secure the 2.5-inch storage drive to the bracket. Then, flex the storage
drive bracket to remove the 2.5-inch storage drive.
Figure 30. Removing the 2.5-inch secondary storage drive from the bracket
10. Insert the two pins on the storage drive bracket with the corresponding holes in the new 2.5-inch
storage drive. Then, pivot the storage drive downward until it snaps into position. Install the fours
screws
1
to secure the 2.5-inch storage drive.
Figure 31. Installing the 2.5-inch secondary storage drive into the bracket
100
ThinkCentre M700 Hardware Maintenance Manual