Type Of Operation; Programmable Inputs, In0 And In1 - ABB PST30 Installation And Commissioning Manual

1SFC132003M0201
10:53 By-pass doesn't close fault,

type of operation

Path in menu:
Menu/SETTINGS/Functional Settings/Faults/BP Open Op
This parameter makes it possible to select between two
different actions of the softstarter if the by-pass contactor
does not close in a proper way.
Stop-M The motor stops and a manual reset is required
before restart.
Stop-A The motor stops and an automatic reset is
performed when the fault disappears.
Parameter Default value Setting range
text
BP Open Stop-M
Op

10:54 Programmable inputs, In0 and In1

Path in menu:
Menu/SETTINGS/Functional Settings/
Inputs/In0 / In1
The softstarter has two programmable inputs, In0 and In1.
They can be used for different purposes depending on the
selected function, independently of each other.
Parameter Default value Setting range
text
In0 Reset
In1 Reset
Caution!
The motor may start unexpectedly if there is a start signal
present when doing any of the actions listed below.
Description
Stop-M, Stop-A Type of opera-
tion if the by-
pass does not
close
Description
None, Reset, Function of pro-
Enable, Jog, DOL, grammable input
Start2, FB-Dis In0
None, Reset, Function of pro-
Enable, Jog, DOL, grammable input
Start3, FB-Dis In1
Chapter 10
Functions
157