Frequency Fault, Type Of Operation; Heat Sink Over-Temperature Fault, Type Of Operation - ABB PST30 Installation And Commissioning Manual

1SFC132003M0201
Parameter Default value Setting range
text
FB Fault Stop–M
Op

10:49 Frequency fault, type of operation

Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/Freq F Op
This parameter makes it possible to select between two
different actions of the softstarter if the frequency is out of
range (frequency fault).
Stop–M The motor stops and a manual reset is required
before restart.
Stop–A The motor stops and an automatic reset is
performed when the fault disappears.
Parameter Default value Setting range
text
Freq F Op Stop–M
10:50 Heat sink over-temperature fault,
type of operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/HS Temp Op
This parameter makes it possible to select between two
different actions if the heat sink temperature of the softstarter
is too high.
Stop–M The motor stops and a manual reset is required
before restart.
Stop–A The motor stops and an automatic reset is
performed when the fault disappears.
Parameter Default value Setting range
text
HS Temp Stop–M
Op
Description
Stop–M, Stop–A Type of opera-
tion for fieldbus
fault
Description
Stop–M, Stop–A Type of operation
for frequency fault
Description
Stop–M, Stop–A Type of opera-
tion for heat sink
over temperature
fault
Chapter 10
Functions
155