Overload Protection, Type Of Operation - ABB PST30 Installation And Commissioning Manual

Chapter 10
Functions
142
10:21 Overload protection, type of
operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Protections/Overload/OL Op
This parameter makes it possible to select between three
different actions by the softstarter when the protection is
activated. It is active only if the motor overload protection is
selected.
Stop–M The motor stops and a manual reset is required
before restart.
Stop–A The motor stops and an automatic reset is
performed when the fault disappears
(motor temp. <80%)
Ind The motor continues to run but a fault indication
is given.
Parameter Default value Setting range
text
OL Op Stop–M
Description
Stop–M, Stop–A, Type of opera-
Ind tion for over-
load protection
1SFC132003M0201