Taking Pictures Using The Built-In Flash; Switching To The Appropriate Flash Setting - Panasonic Lumix VQT2F10 Operating Instructions Manual

[REC] Mode:

Taking Pictures using the Built-in Flash

A To open the flash
Press the flash open button.
B To close the flash
Press the flash until it clicks.
•
Be sure to close the flash when not in use.
•
The flash setting is fixed to [Œ] while the flash
is closed.
Set the flash to match the recording.
•
Open the flash.
Press 1 [‰].
Press 3/4 to select a mode.
•
You can also press 1 [‰] to select.
•
For information about flash settings that can be selected, refer to
"
Available flash settings by Recording Mode
Press [MENU/SET].
•
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
Advanced (Recording pictures)

Switching to the appropriate flash setting

"
. (P66)
- 64 -