Panasonic Lumix VQT2F10 Operating Instructions Manual page 32

[DISPLAY SIZE]
[GUIDE LINE]
•
The [PATTERN] setting is fixed to [
[HISTOGRAM]
[ REC AREA]
•
Motion picture recording frame display is only an approximation.
•
Recording frame display may disappear when zooming to Tele depending on the picture size
setting.
•
This cannot be used during Intelligent Auto Mode.
[HIGHLIGHT]
•
If there are any white saturated areas, we recommend
compensating the exposure towards negative
referring to the histogram
picture again. It may result in a better quality picture.
•
There may be white saturated areas if the distance
between the camera and the subject is too close when
taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area
directly illuminated by the photo flash will become white saturated and appear blinking in black
and white.
•
Highlighting does not work during Multi-Playback (P56), Calendar Search (P157), Playback
Zoom (P56), or Motion Picture Playback (P156).
Preparation
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
Set the pattern of the guide lines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guide lines are displayed.
[REC. INFO.]:
[OFF]/[ON]
] in the Intelligent auto mode.
This allows you to set either to display or not display the
histogram. (P63)
[OFF]/[ON]
Angle of view for motion picture recording can be checked.
[OFF]/[ON]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
(P63) and then taking the
- 32 -
[PATTERN]:
[ ]/[
[ON]
(P75)
(P60)
]
[OFF]