Compensating The Exposure - Panasonic Lumix VQT2F10 Operating Instructions Manual

[REC] Mode:

Compensating the Exposure

Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Under exposed
Compensate the exposure
towards positive.
Press 3 [È] until [EXPOSURE] appears,
compensate the exposure with 2/1.
•
Select [0 EV] to return to the original exposure.
Press [MENU/SET] to finish.
•
You can also press the shutter button halfway to finish.
∫ Operate with the joystick
Tilt the joystick toward 2 to select [È], and then move
3/4 to compensate the exposure.
A Exposure compensation value
•
Select [È] only to return to the original exposure (0 EV).
•
Press the shutter button halfway to finish.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light
given to the CCD by the aperture value and the shutter speed.
•
The exposure compensation value appears on the lower left of the screen.
•
The set exposure value is memorized even if the camera is turned off.
•
The compensation range of the exposure will be limited depending on the brightness of the
subject.
•
Exposure compensation cannot be used when in [STARRY SKY] in Scene Mode.
Advanced (Recording pictures)
Properly
exposed
- 75 -
Compensate the exposure
towards negative.
Overexposed
A