Taking Pictures Using The Built-In Flash; Switching To The Appropriate Flash Setting - Panasonic LUMIX DMC-FS45 Operating Instructions For Advanced Features

Applicable modes:

Taking Pictures Using the Built-in Flash



Switching to the appropriate flash setting

Set the flash to match the recording.
Press 1 [‰].
Press 3/4 to select the item and then press
[MENU/SET].
Item
[‡] ([Auto])
[ ] ([iAuto])
[ ] ([Auto/Red-Eye])
[‰] ([Forced Flash On])
([Slow Sync./
[ ]
Red-Eye])
[Œ] ([Forced Flash Off])
¢1 This can be set only when Intelligent Auto Mode is set.
¢2 The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[Red-Eye Removal]
icon.
A Photo flash
Do not cover it with your fingers or other objects.
The flash is automatically activated when the recording
conditions make it necessary.
¢1
The flash is automatically activated when the recording
conditions make it necessary.
It is activated once before the actual recording to reduce
the red-eye phenomenon (eyes of the subject appearing
¢2
red in the picture) and then activated again for the actual
recording.
•
Use this when you take pictures of people in low
lighting conditions.
The flash is activated every time regardless of the
recording conditions.
•
Use this when your subject is back-lit or under
fluorescent light.
If you take a picture with a dark background landscape,
this feature will slow the shutter speed when the flash is
activated so that the dark background will become bright.
¢2
Simultaneously, it reduces the red-eye phenomenon.
•
Use this when you take pictures of people in front of
a dark background.
The flash is not activated in any recording conditions.
•
Use this when you take pictures in places where the
use of flash is not permitted.
(P74) on the [Rec] menu is set to [ON], [
Recording
Description of settings
- 49 -
] appears on the flash