[Min. Shtr Speed]; [Digital Zoom] - Panasonic Lumix VQT2F10 Operating Instructions Manual

For details on [REC] Mode menu settings, refer to P27.
You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes:
[1/250], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Minimum shutter speed setting
Brightness
Jitter
Note
•
This should usually be set to [1/4 ] to take pictures. (When you select a minimum shutter speed
other than [1/4 ], [
•
Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
•
Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [
red when the shutter button is pressed halfway.
•
The setting is not available when [INTELLIGENT ISO] is being used.
For details on [REC] Mode menu settings, refer to P27.
This can enlarge subjects even more than the Optical Zoom or Extended Optical Zoom.
Applicable modes:
[OFF]/[ON]
Note
•
Refer to P52 for details.
•
If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [AUTO] or [MODE 1].
•
The setting is fixed to [ON] in Macro Zoom Mode.
Advanced (Recording pictures)

[MIN. SHTR SPEED]

] appears on the screen.)

[DIGITAL ZOOM]

1/250
Darker
Less
- 143 -
1
Brighter
More
] will flash in